Running a recalcitrant washing machine can be supremely vexing especially with a massive pile of dirty laundry already piling up. Most reasons behind this issue are pretty easy to recognise and fix quickly with some effort normally being required. Easiest fixes before making a service request or swapping machine include following ones pretty regularly it seems naturally anyway. Frequent causes of malfunctioning washing machines not starting are discussed here and some fixes are suggested pretty thoroughly now.
Check the Power Connection
The simplest and usually the first step to take is to check whether your Washing machine repair near me is getting power. The issue can be small sometimes, such as a faulty socket or a loose plug. Ensure that the plug of the machine is well inserted in the wall socket. Should it appear to be okay, proceed by checking the socket by plugging in a different appliance, e.g., a lamp or charger. In case the machine is not working either, then the problem may be yours in the power supply and not the washing machine.
Further, check the power cord by looking out for damage. A loose or damaged cord will prevent electricity from flowing to the machine. In case you detect damage, you should change the cord. Also, it is advisable not to use extension cords, which might sometimes break down or provide poor electric power.
Inspect the Circuit Breaker or Fuse
When the socket is fine and when the plug is in place, another thing to do is to examine the electrical panel of your home. A washer electrically demands a constant power supply. On other occasions, the circuit breaker may trip or the fuse may blow due to some power surge or overload.
Drive over to your main fuse box or breaker panel and check whether the switch that operates your laundry area has flipped off. And in case it does, then turn it on again and check whether that brings up power on the machine. Replace the blown fuses in houses that have fuses.
When the breaker flips again after being reset, then there might be a greater electrical problem. Where this occurs, it is prudent to contact an electrician.
Make Sure the Door or Lid Is Securely Closed
To ensure the safety of most people, most washing machines are fitted with the feature that makes sure that they cannot be turned on without the door or the lid being well closed. It is possible that even with a seemingly closed door, you can open and push to determine that the door is actually latched.
In case the latch is defective or old, the machine will not recognise the fact that the door is closed, and you will not start. At times, the sensors around the latch region may also be dusty or have debris, leaving the machine to believe that the door is open. The problem can be solved by cleaning the latch and the area around the latch. In case you have a suspicion that the latch is broken, it should be replaced.
Review the Control Settings.
The majority of washing machines are built with a shutdown control that prevents them from turning on unless the door or lid is latched properly. The door may sometimes appear to be closed, yet when checking it, you realise that it is not latched properly, thus giving it a minor push.
In case the latch is in faulty condition or worn out, the machine will not consider that the door is closed and will not start. Other times the machine may think a door is open due to dirt or anything around the latch area. Solutions to the problem include the cleaning of the latch alongside its environs. In case you suspect that the latch is out of order, you may replace it.
Allow the Machine to Cool Down
Perhaps either you have been pushing successive loads or the motor has been overheated. The washing machines have a design that causes them to halt once the temperature of the motor is too hot. Turn off the machine, and allow it to sit off at least 30 minutes. Once it has cooled, then plug it back in and attempt to turn it back on. When it works, then the cause could have been the motor overheating. When it fails, then you are prompted to consider alternative options.
When to Call a Professional
In case you have completed all the procedures mentioned above and the machine will still not start, then it can be the problem of the motor, timer, control board, or wiring. A trained technician is best suited to do these parts. Any inappropriate repairs might be dangerous and might worsen the situation even more.
In such situations, the most appropriate thing is to contact a skilled technician for washing machine repairs. It is the fastest and the most secure one.
Final Thoughts
A washing machine that does not start may be the result of a loose plug or that of a broken motor. These steps will help you to exclude some common and easily resolved issues. Safety above everything; better to call a professional who would assist rather than cause accidents to your machine or other components of your home electrical structure.
